Toyota Tacoma 05-15 Parts & Accessories

Shop Toyota Tacoma accessories 2005-2015 for your 2nd gen Tacoma including suspension, driveline, armour, solid axle swaps parts and overland gear. Order online, then book your install with the Four Wheel Freedom team in Cochrane, just west of Calgary.

TACOMA '05-15

TACOMA '05-15

52 products

Special Offers

Shop 2005-2015 Toyota Tacoma Suspension and Lift Parts

The proper suspension makes up a large share of your Toyota Tacoma's performance. From mid-travel suspension systems to long-travel setups for rough trails, all the way to complete solid axle swaps to conquer bucket-list trails.

Front Coilovers for Lifted 2nd Gen Tacomas

Coilovers combine the spring and shock in one unit at the front of the truck, controlling both ride height and ride quality. Our selection from Radflo, MetalCloak, Icon Vehicle Dynamics, and Eibach works with 1 to 3 inches of lift and fits factory mounting points, making them a solid choice for daily drivers that hit weekend trails.

If you drive rougher terrain, extended-travel coilovers grant additional wheel articulation. Remote and piggyback reservoirs keep nitrogen and oil in separate chambers, preventing damping fade on long, washboard routes.

Toyota Tacoma Coilovers and Suspension

Rear Shocks, Leaf Springs & Supporting Components

The back of a 2nd Gen Tacoma rides on leaf springs. Our rear shocks cover stock height through extended-travel lifts, while spring options from Icon Vehicle Dynamics, All-Pro Offroad, and Carli handle heavier gear loads.

Lifting the front alters steering geometry, requiring supporting hardware to keep angles correct:

  • Upper control arms that restore alignment and caster
  • Heavy-duty serviceable ball joints
  • Heavy-load coil springs for added armor and winch weight
  • Heavy-duty upper strut mounts
  • Cam tab gussets to keep alignment locked on rough terrain
Toyota Tacoma Underbody Skid Plates

Buy Toyota Tacoma Aftermarket Accessories for Underbody Protection

Rocky trails and unpredictable backroads can cause severe damage underneath your truck. Our armor systems protect the engine, transmission, fuel tank, and body panels from rock impacts and trail debris.

Skid Plates & Rock Sliders

Skid plates bolt underneath the chassis to shield critical driveline parts. Our steel and aluminum packages cover the engine, transmission, transfer case, and exhaust routing, with dedicated add-ons for lower control arms.

Rock sliders mount directly to the frame beneath the doors, safeguarding cab corners and rocker panels against high-centering on ledges and boulders.

Differential Armor & Heavy-Duty Mud Flaps

The low-hanging rear axle differential housing sits directly in line with trail obstacles. Reinforced differential armor covers the cast housing to absorb impacts and prevent trail punctures.

Heavy-duty universal mud flaps keep gravel, rocks, and highway slush off your lower panels and prevent debris spray from hitting trailing vehicles.

Upgrade Your Tacoma With Lift Support and Driveline Parts

Taller lift kits and larger tires increase stress on factory suspension components and introduce tire-rubbing issues within the front wheel wells.

Body Mount Chop Kits & Gussets

Larger tires make contact with the factory body mounts located directly behind the front wheels. Body mount chop (BMC) plates provide structural reinforcement after trimming the mount back for tire clearance.

Front spindle gussets reinforce factory steering knuckles against bending, while cam tab gussets replace thin factory alignment tabs that fold under off-road stress.

Toyota Tacoma Clearance and Suspension Support

Braided Brake Lines & Driveline Bushings

Suspension lifts allow greater axle drop, requiring extended-length braided stainless-steel brake lines to prevent tension at full droop while improving pedal responsiveness.

You will also find replacement front differential clamshell bushings and specialized install tools to eliminate driveline vibration on lifted 4WD setups.

Solid Axle Swap Components

Get Toyota Tacoma Aftermarket Parts for Solid Axle and Long-Travel Builds

Some drivers build far beyond standard lifts. Solid axle swaps replace the factory independent front suspension with a heavy-duty straight axle for extreme trail capability.

Front Solid Axle Swap Parts

Front solid axle conversions utilize coilovers matched with a rigid 3-link suspension setup and panhard bar. Core components include:

  • Front 3-link kits and DOM steering links
  • Reinforced frame plates and integrated shock towers
  • High-clearance transmission crossmembers with removable link mounts
  • High-steer arms and steering shaft kits

Rear Link Conversions & Custom Fabrication Parts

Rear 3-link systems replace traditional leaf springs, and under-bed shock relocation towers allow long-travel shocks to operate without cutting open the truck bed floor.

Polyurethane engine mounts keep the drivetrain steady under heavy torque, while weld-on frame plates provide solid foundations for custom high-clearance bumpers and recovery anchors.

Outfit Your 2005-2015 Tacoma With Overland Racks and Accessories

Dedicated bed and roof racks provide secure locations for camping gear and recovery tools while keeping cargo space open in the truck bed.

Roof Racks, Bed Systems & Gear Mounts

Cab-mounted roof racks offer low-profile platforms for light bars and recovery gear. Further back, mid and full-height bed racks support rooftop tents and equipment cases above the bed floor.

Under-seat and in-cab mounting kits provide secure mounting for air compressors, while exterior ditch light brackets secure forward-facing lighting to the A-pillars.

Toyota Tacoma Overland Accessories

Professional Installation & Support Near Calgary, AB

At Four Wheel Freedom, our Red Seal certified technicians install everything from bolt-on accessories to complete solid axle builds on 2nd Gen Tacomas. We test and tune our builds for snow, mud, and Rocky Mountain backcountry conditions.

Shop our full collection of 2005-2015 Tacoma parts above to begin your build.

FAQs - We've Got Answers

What years are the 2nd gen Toyota Tacoma?

The 2nd gen Toyota Tacoma covers the 2005 to 2015 model years. Our Toyota Tacoma accessories 2005-2015 collection focuses on that generation, and many parts also fit later Tacomas or related Toyota models like the 4Runner and FJ Cruiser. Product listings show the exact years a part fits, which helps when shopping for Toyota parts and accessories or any other year in the range.

Do 2005 Toyota Tacoma accessories fit a 2015 Tacoma?

Yes, most 2005 Toyota Tacoma accessories also fit a 2015 truck because both years share the same 2nd gen platform. Buyers of 2015 Toyota Tacoma accessories or accessories for 2007 Toyota Tacoma trucks can choose from the same suspension, armour and overland parts listed for 2005 trucks.

Do 3rd gen Tacoma parts fit a 2nd gen Tacoma?

Yes, many 3rd gen parts also fit the 2nd gen truck. Suspension parts, skid plates, racks and mounts in this collection often cover both 2005-2015 and 2016-2023 Tacomas, while a few parts suit the 2nd gen only.

Are there accessories for a 2005 Toyota Tacoma PreRunner?

Yes, the rear polyurethane leaf spring bushings in this collection list PreRunner fitment. Front differential and 4WD parts only suit 4x4 trucks, which keeps them out of the range of 2005 Toyota Tacoma PreRunner accessories.

Can a 2nd gen Tacoma fit 35-inch tires?

Yes, with the right supporting parts. The body mount relocation kit in this collection allows tires up to 35 inches without rubbing the body mount. You will still need other trimming. Your lift height and wheel offset also affect clearance.

Do extended-travel coilovers need aftermarket upper control arms?

Yes, the extended-travel front coilovers in this collection need aftermarket upper control arms. Aftermarket arms allow the extra wheel travel those coilovers provide.

Does a Tacoma need an alignment after a lift?

Yes, lifting a Tacoma changes the suspension angles and can make the truck wander on the road. Our shop uses Hunter alignment equipment to keep your truck driving straight after a lift install.

What does a clamshell bushing do on a Tacoma?

The clamshell bushing replaces the needle bearing on the driver's side of the Tacoma's 8-inch front differential. The upgrade helps reduce the vibration and axle shaft movement common to that differential.